|
상세설명
Overview
PROFLOOR, premium mortar
As premium mortar, self-leveling type, plastering type and B type are available. No cracks appear as its contraction rate which results from temperature change is minimized. With higher compressive strength, this mortar is suitable for damp surface, outside & inside. Also, this mortar is polishable and can be mixed with aggregate or glass to make more than THK100mm.
As premium mortar, self-leveling type, plastering type and B type are available. No cracks appear as its contraction rate which results from temperature change is minimized. With higher compressive strength, this mortar is suitable for damp surface, outside & inside. Also, this mortar is polishable and can be mixed with aggregate or glass to make more than THK100mm.
Benefits
- Quick setting time
- Excellent strength and durable
- Eco-friendly inorganic flooring
- No primer
- Polishable mortar
- Resistant to salt water, acid
- Damp area
- Nonflammable finish
- No cracks outside, at 30℃
- THK 6mm, outside
- Mixed with aggregate if more than THK 10mm
- Interior & exterior
Application(plastering type)
- Feeding facilities, kitchens, ramps, areas demanding frequent water usage or quick applying.
- Repairs or reinforcement of damp and condensation concrete floors, walls and weaken or damaged area.
- Finish of new or older concrete inside or outside parking lots.
- Floor finish in parking lots, shops, hospitals, schools, factories, warehouses, barns.
- Various places including water management facilities, chemical plants, repair shops, road gutter, harbors, etc.
- The areas demanding strong & hard floor bearing frequent heavy vehicle traffic.
- Shops, exhibition halls, schools, lobbies, government offices etc.
- Suitable for polishing system
Technical Data
- Compressive strength : 54MPa
- Technical consumption: 1mm/1.9kg/1㎡
- Initial setting time : 30 min. (25℃)
- Foot traffic: 2 hrs. (25℃)
- Vehicle traffic: 12 hrs. (25℃)
- Color : Gray
- Tools : trowel
Health and Safety Precaution
- Wear protective clothing, gloves, eye protection and dust mask during work.
- In case of contact with skin or clothing, wipe off with a cloth and wash with soap and water.
- If the product is swallowed, inhaled or gets in eyes, wash it off with plenty of clean water and seek medical advice immediately.
- Provide ample ventilation when working with the product in confined spaces.
- No naked flames, cigarettes or matches should be allowed near the products.
- Dispose of waste and residues in accordance with local authority requirements.
- In all cases, users should refer to the most recent the Material Safety Data Sheet (MSDS) before use.
Shelf Life
12 months, if kept away from moisture, direct sunlight and kept inside
