|
상세설명
Benefits
- Organic and inorganic hybrid coat
- Non flammable
- Super dust resistance and easy cleaning
- Gloss and color maintenance for a long time
- Safe for human
- Excellent resistant to chemical, salt water, water, solvent
Application
- Semiconductor factories, food facilities, chemical foctories, lab. demanding chemical resistance
- Parking lots, schools, areas with poor ventilation
- Remodeling construction requiring quick work
- Repainting of the existing floors
- interior floors for decoration
Technical Data
- Main component : organic and inorganic complex emulsion resin.
- Recommended thickness : 50~60㎛/0.07kg/㎡ -1coat / 150~18㎛ - 3coats(1st,2nd:color,3rd:celar)
- Technical consumption : 5.5㎡/kg/60㎛(different depending on the condition of floor)
- Density : 1.1±0.05
- Solid content (weight ratio) : about 40% (±2%)
- Pot life : 50 min./ 20℃
- Tack free time : 2 hrs. (20℃)
- Curing time : 24 hrs. (20℃)
- Mixing ratio (weight ratio) : component A : component B = 3.5 : 1 (clear), 5.5:3.5(color)
- Repainting interval time : 4~10 hrs.(20℃)
- Tools : roller, airless spray,brush
- Package : 14kg:4kg(clear), 11kg:7kg(color)
Application Procedure
- In case of new concrete, remove oil, laitance or any other dust.
- Apply it only if below 10% of moisture content
- Cracks and holes are filled with PRO FLOOR or epoxy putty before application SM COAT FC
- Mix part A and part B completely in the correct proportion with electric mixer for 2min.
- Apply with roller, airless spray, brush to the thickness of 60~70㎛
- Repainting interval time is within 10hrs.(1st,2nd,3rd coat)>
- If needed, dilute it with up to 5% of water based on bolume ratio
- For reduce of vehicle noise & non-slip, add vacuum ceramic balls up to 4~5% of volume ratio and only apply it 2nd coat out of 3 coats.
- Surface treatment is required if repainting interval time is over 10hours
- In case of marking parking line, passing at least 5hrs. of base coat, use SM COAT FC for 2 coats.
Health and Safety Precaution
- Wear protective clothing, gloves, eye protection and dust mask during work.
- In case of contact with skin or clothing, wipe off with a cloth and wash with soap and water.
- If the product is swallowed, inhaled or gets in eyes, wash it off with plenty of clean water and seek medical advice immediately.
- Provide ample ventilation when working with the product in confined spaces.
- No naked flames, cigarettes or matches should be allowed near the products.
- Dispose of waste and residues in accordance with local authority requirements.
- In all cases, users should refer to the most recent the Material Safety Data Sheet (MSDS) before use.
Storage
Stored products above 5℃ in unopened original containers protected from sunlight and frost.
Shelf life
12 months (stored away from moisture and direct sunlight)
