본문 바로가기

현재 페이지 위치

HOME > > PRO FLOOR SL


PRO FLOOR SL

PRO FLOOR SL
  • Eco-friendly inorganic flooring
  • Nonflammable
  • THK 3~15mm / interior
  • Quick setting time & low cost
  • Self-leveling
  • Suitable for damp area or where condensation occurs
상세설명
Application (self –leveling type)
▪ Repairs and reinforcement of damp and condensation concrete floors, walls and weaken or damaged area.
▪ Finish of new or older concrete inside or outside parking lots.
▪ Floor finish in parking lots, shops, hospitals, schools, factories, warehouses, barns.
▪ Various places including water management facilities, chemical plants, repair shops, road gutter, harbors.
▪ Places requiring quick curing to shorten period of construction
▪ Areas demanding strong & hard floor bearing frequent heavy vehicle traffic.
▪ Suitable for polishing system
Technical Data
▪ Main component : Mineral, silica, superplasticizer and titanium powder
▪ Recommended thickness : 3~15mm(interior)
▪ Technical consumption : 5.4kg/㎡/3mm
▪ Density : 1.8kg
▪ Initial setting time : 25 min. (25℃)
▪ Tack free time : 2 hrs. (25℃)
▪ Setting time : 12 hrs. (25℃)
▪ Mixing ratio : 25kg of product : 19~20% of water (4.75~5 liter)
▪ Color : Gray, red, green, yellow, dark gray, white
▪ Shelf life : 12 months ( stored away from moisture and direct sunlight )
▪ Tools : rake, trowel
Features
Molten rock, which is mainly composed of Aluminate and magnesium, at extremely high temperature inside the Earth has been melted and solidified repeatedly by volcanic activity in sea water to produce raw stone which is highly dense and resistant to salt water or any other chemicals. This is main ingredient of PRO-FLOOR. It gives high ductility for compressive strength and superior resistance to surface abrasion which results from its high density.

No cracks will occur because its contraction according to the variation of temperature is minimized. Also, chemical-free PRO-FLOOR is ideal for floors or walls as eco-friendly product.

Received a very satisfactory test result from North Bay Cement , raw material supplying company, after sending the SEMINGIGONG’s proprietary PRO-FLOOR (self-leveling and plastering type).

Two options are available to meet customers needs ; self-leveling type and plastering type.
Polishing System
▪ : Follow the below procedures to complete grinding(polishing) finish after setting PRO-FLOOR.
A -If the compressive strength of concrete is over 240(N/mm²) and substrate is sound, remove any contamination on the surface and apply PRO-FLOOR, without saturating surface as primer, to a thickness of 10mm.
B - Only set K sealer thoroughly before applying PRO-FLOOR to a thickness of 10mm, if the concrete is much older, ambient temperature is not proper, the substrate is not sound or the compressive strength is decreased.
C – In case of using PRO FLOOR as finish in polishing system, aggregate(below 6mm), silica, mirror or glass can be mixed with PRO FLOOR.

▪ The following are 2 technical details supporting option B
1. During process of applying PRO-FLOOR on the saturated substrate, mineral particles have been absorbed into the substrate with water so grinding or polishing is likely to increase pore space on the surface.
2. Grinding can remove the surface of mineral cement slightly and may cause loosen or weaken bond between cement and silica or aggregate.
* To get more details in PRO-FLOOR polishing, it is recommended to require information or contact your provider’s technical support for assistance.

▪ What is SMK sealer?
Compared with 0.72μ of acrylic particle, SMK sealer has 0.09μ nano particle, which exhibits excellent penetrability and solid property. Depending on dilution ratio of water, application can be different : primer or protective coat. As one component type, emulsion, PH8(water : PH5~6, concrete : PH2.5), SMK sealer does not react to gasoline or alkaline. Also, it is safe for humans and provides easy working.

▪ Note
- If the substrate is not sound, clean the surface by dry process, place SMK sealer (acrylic primer) thoroughly and then cure for 2 ~3 hours before application of PRO FLOOR.
- Foot traffic is at least 6 hours in summer season and 12 hours in winter season and heavy vehicle traffic is 96 hours after setting PRO FLOOR.
*To achieve more than 10mm of thickness, PRO-FLOOR can be mixed with 20~ 30% of silica or aggregates but prior to placing, it is recommended to contact your provider’s technical support for assistance.
Health and Safety Precaution
1. Wear protective clothing, gloves, eye protection and dust mask during work.
2. In case of contact with skin or clothing, wipe off with a cloth and wash with soap and water.
3. If the product is swallowed, inhaled or gets in eyes, wash it off with plenty of clean water and seek medical advice immediately.
4. Provide ample ventilation when working with the product in confined spaces.
5. No naked flames, cigarettes or matches should be allowed near the products.
6. Dispose of waste and residues in accordance with local authority requirements.
7. In all cases, users should refer to the most recent the Material Safety Data Sheet (MSDS) before use.

Storage
Stored products above 5℃ in unopened original containers protected from sunlight and frost.
Shelf life
12 months (stored away from moisture and direct sunlight)

페이지 맨 위로 이동